COMPEL - The international journal for computation and mathematics in electrical and electronic engineering
Issue(s) available: 202 – From Volume: 1 Issue: 1, to Volume: 43 Issue: 2
Volume 42
Volume 41
Volume 39
Volume 38
Volume 37
Volume 36
Volume 35
Volume 34
-
Issue 4 2015
Volume 33
-
Issue 6 2014 Selected papers of the 17th International Symposium on Theoretical Electrical Engineering - ISTET 2013 (Pilsen, Czech Republic)
Volume 32
Volume 31
Volume 30
-
Issue 4 2011 Selected papers from the 15th International Symposium on Theoretical Electrical Engineering, ISTET09
-
Issue 3 2011 Selected papers from the 21st Symposium on Electromagnetic Phenomena in Nonlinear Circuits
-
Issue 2 2011
-
Issue 1 2011 Selected papers from the 4th International Conference and Exhibition on Ecological Vehicles and Renewable Energies EVER09
Volume 29
-
Issue 5 2010 Selected papers from the 18th International Conference on Electrical Machines, ICEM 2008
-
Issue 4 2010 Selected Papers from the 14th International Symposium on Electromagnetic Fields in Electrical Engineering ISEF2009
-
Issue 3 2010
-
Issue 2 2010 Selected papers from the International Conference on Wireless Systems Computation, Assembling and Compatibility CAC 2008
-
Issue 1 2010 Selected papers from the 13th Power Electronics and Motion Control Conference, EPEPEMC 2008
Volume 28
-
Issue 4 2009 Selected papers from the 13th International IGTE Symposium on Numerical Field Calculation in Electrical Engineering
-
Issue 3 2009 Selected Papers from XX Symposium in Electromagnetic Phenomena in Nonlinear Circuits EPNC 2008
-
Issue 2 2009
-
Issue 1 2009 Selected papers from the 14th International Symposium on Theoretical Electrical Engineering ISTET 2007
Volume 27
-
Issue 6 2008 Special Section on the Third Edition of the Italian Workshop on Finite Element Method as Applied to Electrical and Information Engineering
-
Issue 5 2008 Papers from the International Conference on Power Electrical Systems, organized within the Fourth IEEE Multiconference on Systems, Signals and Devices
-
Issue 3 2008
-
Issue 2 2008 SPECIAL SECTION Selected Papers from the International Conference on Heating by Electromagnetic Sources
-
Issue 1 2008 Selected papers from the 7th International Symposium on Electric and Magnetic Fields, June 2006
Volume 26
-
Issue 5 2007
-
Issue 4 2007 Selected papers from the 19th Symposium on Electromagnetic Phenomena in Nonlinear Circuits 2006
-
Issue 3 2007 Selected papers from the 12th International IGTE Symposium on Numerical Field Calculation in Electrical Engineering, September 2006
-
Issue 2 2007 Selected papers from the 9th Workshop on Optimization and Inverse Problems in Electromagnetism, Sorrento 2006
-
Issue 1 2007 Selected papers from the 3rd International Conference on Systems, Signals and Devices, March 2005
Volume 25
Optimization of an inductor for electromagnetic levitation melting
Błażej Nycz, Roman Przyłucki, Łukasz Maliński, Slawomir GolakThe study aims to maximize the efficiency of the process under a given current condition by changing the geometry of the coil. This optimization is economically justified by…
A versatile plasma generation power supply featuring a multilevel converter for arbitrary waveforms generation
Ignacio Jesús Álvarez Gariburo, Hector Sarnago, Oscar LuciaPlasma technology has become of great interest in a wide variety of industrial and domestic applications. Moreover, the application of plasma in the domestic field has increased…
Multiphysics performance of surrogate models on skewed pole surface-mounted permanent magnet motors
Issah Ibrahim, David LowtherEvaluating the multiphysics performance of an electric motor can be a computationally intensive process, especially where several complex subsystems of the motor are coupled…
A high-performance multilevel power supply for versatile induction heating processes
Ignacio Jesús Álvarez Gariburo, Hector Sarnago, Oscar LuciaInduction heating processes need to adapt to complex geometries or variable processes that require a high degree of flexibility in the induction heating setup. This is usually…
Optimization of conductors arrangement in slot for alternating current winding losses reduction
Belli Zoubida, Aomar LyesThe purpose of this study is to evaluate and minimize the losses of alternating current (AC) in the winding of electrical machines. AC winding losses are frequently disregarded at…
Topological optimization in 3D-magnetostatics: development of adjoint methods using the equations of magnetic moments
Sophie Michel, Frederic Messine, Jean-René PoirierThe purpose of this paper is mainly to develop the adjoint method within the method of magnetic moment (MMM) and thus, to provide an efficient new way to solve topology…
Trust region framework-based design of sub-6 GHz m-MIMO antenna and evaluation of SAR
Ahmet Turgut, Begum Korunur EngizCurrently, massive multiple-input multiple-output (m-MIMO) antennas are typically designed using complex trial-and-error methods. The purpose of this study is to determine an…
Stochastic approach for maximum power point determination for bifacial PV modules by implementing two different cell models
Angela Najdoska, Goga Vladimir CvetkovskiThis paper presents the determination of the maximum power point of a bifacial photovoltaic (PV) system using two different cell models. The optimal power point is determined by…
Interactive and educational simulation tool for permanent magnet synchronous machines
Alexander Schugardt, Louis Kaiser, Fatih Avcilar, Uwe SchäferThis paper aims to present an interactive design and simulation tool for permanent magnet synchronous machines based on the finite-element-method. The tool is intended for…
Galerkin-FEM approach for dynamic recovering of the plate profile in electrostatic MEMS with fringing field
Mario Versaci, Giovanni Angiulli, Luisa Angela Fattorusso, Paolo Di Barba, Alessandra JannelliBased on previous results of the existence, uniqueness, and regularity conditions for a continuous dynamic model for a parallel-plate electrostatic…
3D electromagnetic analytical model for radial-flux eddy-current couplers
Mohammed Messadi, Larbi Hadjout, Noureddine TakorabetThis paper aims to develop a new 3D analytical model in cylindrical coordinates to study radial flux eddy current couplers (RFECC) while considering the magnetic edge and 3D…
Short-voltage pulse generation for induction heating load detection on a multi-output inverter with shared power devices
Pablo Guillén, Hector Sarnago, Oscar Lucia, José M. BurdioThe purpose of this paper is to develop a load detection method for domestic induction cooktops. The solution aims to minimize its impact in the converter power transmission while…
Comparison of a quasi Newton method using Broyden’s update formula and an adjoint method for determining local magnetic material properties of electrical steel sheets
Andreas Gschwentner, Manfred Kaltenbacher, Barbara Kaltenbacher, Klaus RoppertPerforming accurate numerical simulations of electrical drives, the precise knowledge of the local magnetic material properties is of utmost importance. Due to the various…
Basic properties of ferromagnetic vector hysteresis play models and their validation by finite element method
Xiao Xiao, Andreas Christian Thul, Lars Eric Müller, Kay HameyerMagnetic hysteresis holds significant technical and physical importance in the design of electromagnetic components. Despite extensive research in this area, modeling magnetic…
Analysis of current distribution and termination conditions in 2D metasurfaces
Sami Barmada, Nunzia Fontana, Leonardo Sandrolini, Mattia SimonazziThe purpose of this paper is to gain a better understanding on how metasurfaces behave, in terms of currents in each unit cell. A better knowledge of their behavior could lead to…
Bearing fault diagnosis of induction machines using VMD-DWT and composite multiscale weighted permutation entropy
Ahmed Taibi, Said Touati, Lyes Aomar, Nabil IkhlefBearings play a critical role in the reliable operation of induction machines, and their failure can lead to significant operational challenges and downtime. Detecting and…
MRI compatible electromagnetic actuator: magneto-thermal design and optimization
Boussad Moualek, Simon Chauviere, Lamia Belguerras, Smail Mezani, Thierry LubinThe purpose of this study is to develop a magnetic resonance imaging (MRI)-safe iron-free electrical actuator for MR-guided surgical interventions.
Modelling permanent magnet excited uniform fields with rational approximations
Stefano Costa, Eugenio Costamagna, Paolo Di BarbaA novel method for modelling permanent magnets is investigated based on numerical approximations with rational functions. This study aims to introduce the AAA algorithm and other…
An FEM framework for modeling forces between NdFeB magnets and HTS bulks
Guilherme Homrich, Aly Ferreira Flores Filho, Paulo Roberto Eckert, David George DorrellThis paper aims to introduce an alternative for modeling levitation forces between NdFeB magnets and bulks of high-temperature superconductors (HTS). The presented approach should…
Multi-objective optimization and uncertainty quantification for inductors based on neural network
Xiaohan Kong, Shuli Yin, Yunyi Gong, Hajime IgarashiThe prolonged training time of the neural network (NN) has sparked considerable debate regarding their application in the field of optimization. The purpose of this paper is to…
A topology optimization of on-chip planar inductor based on evolutional on/off method and CMA-ES
Takahiro Sato, Kota WatanabeThere are few reports that evolutional topology optimization methods are applied to the conductor geometry design problems. This paper aims to propose an evolutional topology…
Full harmonic spectrum calculation of magnetic pressures in synchronous permanent magnet machines based on a new realistic partial analytical model: application to SVPWM and DPWM2
Salma Benharref, Vincent Lanfranchi, Daniel Depernet, Tahar Hamiti, Sara BazharThe purpose of this paper is to propose a new method that allows to compare the magnetic pressures of different pulse width modulation (PWM) strategies in a fast and efficient way.
Comparison of simulations of the gas conduction in HVDC GIL by application of nonlinear conductivity model and ion-drift-diffusion model
Hendrik Hensel, Markus ClemensGas insulated systems, such as gas insulated lines (GIL), use insulating gas, mostly sulfur hexalfluoride (SF6), to enable a higher dielectric strength compared to e.g. air…
Numerical modeling of magnetic cores with combined electrical steel grades
Oussama-Ali Dabaj, Ronan Corin, Jean-Philippe Lecointe, Cristian Demian, Jonathan BlaszkowskiThis paper aims to investigate the impact of combining grain-oriented electrical steel (GOES) grades on specific iron losses and the flux density distribution within a…
Numerical modelling of heating and melting of metal in a mini industrial direct current electrical arc furnace
Sergejs Pavlovs, Andris Jakovičs, Alexander ChudnovskyThe purpose of this paper is the study of the electro-vortex flow (EVF) as well as heating and melting processes for mini industrial direct current electric arc furnace (DC EAF).
Analysis of data-driven approaches for radar target classification
Aysu Coşkun, Sándor BiliczThis study focuses on the classification of targets with varying shapes using radar cross section (RCS), which is influenced by the target’s shape. This study aims to develop a…
Optimizing IRE targeting using multi-electrode structure and biomedical multi-output generator
Borja López-Alonso, Pablo Briz, Hector Sarnago, José M. Burdio, Oscar LuciaThis paper aims to study the feasibility of proposed method to focus the electroporation ablation by mean of multi-output multi-electrode system.
A new approach for the flashover voltage prediction using an arc propagation reproduction on a high-voltage insulator
Dyhia Doufene, Samira Benharat, Abdelmoumen Essmine, Oussama Bouzegaou, Slimane BouazabiaThis paper aims to introduce a new numerical model that predicts the flashover voltage (FOV) value in the presence of polluted air surrounding a high-voltage insulator. The model…
Double-wall pipe-type power-frequency electromagnetic heating device with diversion ring and its heating mode optimization
Feng Zhou, Zixuan Wang, Yuxiang ZhaoThe purpose of this paper is to study the pipe-type electromagnetic induction heating device under power frequency condition.
ISSN:
0332-1649Online date, start – end:
1982Copyright Holder:
Emerald Publishing LimitedOpen Access:
hybridEditor:
- Prof Jan Sykulski